Follow Us on LinkedIn Follow Us on YouTube

  1. CLR 1376 / CLH 6930

    130°C Operating. Low Exotherm, low shrinkage, excellent shock resistance. A two component epoxy which is recommended for potting and casting transformers, coils and other electronic components. The system provides a good pot life with low exotherm and shrinkage. Cured material has excellent thermal shock resistance. CLR 1376 / CLH 6930

  2. CLR 1396 / CLH 6930

    Extremely strong adhesive. Remains strong at elevated temperatures. A high performance, room temperature curing, 100% solids, epoxy adhesive. This product bonds to a wide variety of substrates and was specifically developed to seal porous metal substrates. CLR 1396 / CLH 6930

  3. CLR 1476 / CLH 6730

    Low viscosity epoxy, Suitable for machine dispense, Pot / Cast electronic switches. A low viscosity, general purpose, room temperature curing, epoxy encapsulant. Product is filled with non-abrasive fillers suitable for machine dispensing. Product has good physical, thermal and electrical properties. CLR 1476 / CLH 6730

  4. CLR 1566 / CLH 6020

    Excellent heat dissipation, 125°C Operating. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6020

  5. CLR 1566 / CLH 6025

    Long pot life, Excellent heat dissipation. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6025

  6. CLR 1625 / CLH 6330

    General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Its low viscosity gives the system excellent wet -out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. For a faster system use hardener CLH 6333. CLR 1625 / CLH 6330

  7. CLR 1625 / CLH 6333

    General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. CLR 1625 / CLH 6333

  8. CLR 1820 / CLH 6440

    Product is machine dispense friendly. A filled, high temperature operating, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive fillers and convenient mix ratio makes it suitable for processing in automatic dispense equipment. As part of an insulating system, it will meet class H, electrical temperature. This product meets UL94-V1 in house flammability testing. CLR 1820 / CLH 6440

  9. CLR 1821 / CLH 6441

    UL 94-V1 Epoxy system for casting and potting electrical and electronic components, as part of an electrical insulating system it will meet Class H electrical temperature classification. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. CLR 1821 / CLH 6441

  10. CLR 1826 / CLH 6445

    1:1 Mix Ratio, Fast Gel, Medium viscosity, Flameout, 180°C operating, Ballast potting. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio make it suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. CLR 1826 / CLH 6445

  11. CLR 1831 / CLH 5185

    Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. A heat cure, low stress, extremely tough, epoxy casting compound. Product was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1831 / CLH 5185

  12. CLR 1836 / CLH 5185

    Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1836 / CLH 5185

  13. CLR 1837 / CLH 5185

    Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1837 / CLH 5185

  14. CLR 1876 / CLH 6631

    Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631

  15. CLR 2161 / CLH 5100

    Heat Cure, UV resistant, outdoor, low-stress, large mass casting epoxy system for instrument and power transformers. Extremely tough, epoxy compound. this system was specifically developed for use on outdoor instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 2161 / CLH 5100

  16. CLR 3516 / CLH 6230

    Room temperature cure, filled, semi-flexible epoxy system. Long pot life material is suitable for large mass casting or heat-induced curing with minimal stress. This product was specifically developed for potting / casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. For a softer system, CLR 3506 / CLH 6230 is recommended. CLR 3516 / CLH 6230

  17. CLS 9600

    High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600

  18. XP 61862 / CLI 4161

    UL 94-V0 certified fast setting, potting / casting PU for transformers, coils, and electronic components. A two component, low viscosity, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. Product has excellent thermal shock resistance. XP 61862 / CLI 4161

  19. XR 52092 / XH 62093

    1:1 machine dispense adhesive. Adhesive for bonding synthetic aggregates to metal. A medium viscosity, room temperature curing, two component epoxy adhesive. Product was developed with improved thin film set time when bonding metal substrates. XR 52092 / XH 62093

  20. XRD 1014 / XHD 1015

    High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

Results 21 - 40 of 44

Filters